Tobacco is even more dangerous than alcohol. For the sake of mankind, researchers in 2003 found a better way to smoke. This is the electronic inhaler. To start with this alternative to the ordinary cigarette, you must first learn about all its components. E-liquid is the substance with which the cartridge of an electronic cigarette is filled. It is heated by the atomizer and turns into a dense vapour that is very similar to the smoke of a regular cigarette.
If the concept of the personal vaporizer has existed for many decades, it was at the beginning of the 2010s that the electronic cigarette started to make people talk about it, becoming more democratic and becoming at lightning speed one of the tools for weaning off the tobacco most used and in any case, the most popular. Continue reading
Sometimes, some customers are surprised to see the colour of their e-liquid change, whether in the e-liquid bottle or directly in the clearomizer.
The liquid, which was originally transparent in colour, begins to turn yellow or even turn brown over time.
Is this normal? Is there a health risk? Should you deny your e-liquid?
We are going to review the different causes that can explain this colour change.
You’ll need:
- of the base in 0 mg/mL.
- nicotine boosters, which you will need to add to your base in 0 mg/mL to obtain a nicotine base (the table will allow you to determine the number of boosters according to the desired dosage).
- aromas that you will add to this base + boosters to give a perfume to your liquid.
There are DIY packs that contain base in 0 mg/mL and boosters.
You choose a nicotine level and all you have to do is pour all the boosters into the base bottle and then add your aroma.
Your electronic cigarette may have problems with leaks, e-liquids rising or gurgling. You left your e-cigarette in your suitcase and found all your stuff soaked?
You put it in your purse when you travel and unfortunately found cash on your phone and your wallet? You were vaping and a few hot drops slipped on your tongue and burned you a little?
More than unpleasant discoveries which are however easily resolvable! So how do we put an end to all these problems with e-liquids, leaks or even gurgling?
It is sometimes unnecessary to charge your electronic cigarette. The problem usually comes from the clearomiser. We present you with some problems of this type and give you some tips to put an end to these uncomfortable situations.
While some people are content with buying pre-made coils, others aspire to take full control of their vaping experience by building their coils.
A good idea here!
Not only does this allow you to customize the specifics of your resistance to suit your preferences, but reaping the rewards of your labour can also be extremely fun and rewarding. But how to build your resistance to electronic cigarettes?
We explain everything to you!
5 tips to avoid leaks on your clearomiser
1. Start with a thorough cleaning of your electronic cigarette
The first reflex to have when leaks appear is to clean your clearomiser.
To do so, here are 5 simple steps to follow:
- Separate the clearomiser from the battery;
- Unscrew the tank ;
- Remove the resistor;
- Clean all the accessories with lukewarm water without forgetting the lower part with the airflow;
- Once all the elements are perfectly clean, dry them properly and reassemble the assembly on the battery then carry out the test.
2. Check the correct assembly of your e-cigarette
If the cleaning was not enough to stop the leaks, then the problem may be with the assembly.
– Check that the resistor is tight.
– Check that the clearomizer is tight to the mod.
If everything is ok, you must also check the condition of the joints at the level of the resistance, the atomizer and the top cap. Indeed, a porous or worn seal will no longer do its job properly and the e-liquid would leak for sure.
3. The proper functioning of the resistance
You have to take care of your resistance. A worn coil can be the cause of your clearomiser leaking. If you haven’t changed your resistance for a fortnight, the leak may be coming from there.
4. An e-liquid unsuitable for your clearomiser
Did you notice that the leaks started when you changed fluids?
Your clearomiser may not support the new liquid you have chosen.
Indeed, the composition of an e-liquid varies enormously and the clearomiser more or less supports a high level of vegetable glycerin.
We advise you to ask your seller to find out which liquid is suitable for your clearomiser.
On the other hand, you must always take care to respect the maximum level of e-liquid that the tank of the clearomizer can contain.
5. The position of your electronic cigarette when vaping
Depending on the model, liquid rises can occur depending on the position in which you vape.
Keep your vaporizer vertical to avoid any risk of leaks.
If after all these manipulations your clearomiser is still leaking, we advise you to contact your seller and explain the problem encountered because it may be a defect in the equipment.
When you start using an electronic cigarette, you gradually discover new terms. This is particularly the case with vaping, vaping, drip tips or the famous DL and MTL. Direct inhalation or indirect inhalation: these two abbreviations are still unknown, even to regulars. Knowing the different types of vapes allows you to choose your electronic cigarette well, so let’s take stock of it.
It sometimes happens that your e-liquid takes on a yellow or even brown hue, but why? This phenomenon can appear in the bottle or directly in your clearomiser, whether with a ready-made e-liquid or a DIY. Is this normal? Can I still vape my liquid? This is what we are going to explain to you today.
One of the most exciting things to consider in ensuring a successful vaping experience is the flavours you choose. Many stores offer a variety of samples allowing you to let your taste buds explore all tastes. desserts, sweets, well-known drinks and more! You can even mix and match flavours to create your unique combination. The possibilities are truly endless.