SMOK RPM80 Pro Pod Mod Kit is a closed system with an output of 80 W and the best Juul alternative powered by a replaceable 18650 battery that you can charge with the included USB Type-C cable, equipped with the modern IQ-80 chipset, which is distinguished by its performance and functionality, and designed for the use of evaporators of the series RGC and RPM. This best Juul alternative is equipped with a color display on which all the necessary information is indicated.
Smok introduced the versatile RPM80 Pro Pod Mod Kit as the best Juul alternative.
The device received a stylish design, an original form factor and a rich gamut of colors, consisting of seven variations.
On the front side of the device there is a color display with a diagonal of 0.96 inches, on which you can find all the necessary information: voltage, current charge level, evaporator resistance, number and time of puffs, and also change the color scheme. Power adjustment is done with small keys, and the square button “FIRE” is responsible for supplying current.
Smok RPM80 Pro equipped with a proprietary chipset IQ-80, allowing you to optimally set the power from 1 to 80 watts.
The device supports resistances ranging from 0.1 ohms to 2.5 ohms.
Power is provided by a replaceable 18650 format battery, which is installed under the bottom flip cover of the mod. The battery is charged using the USB Type-C connector, located on the front surface of the device, with a current of 1.3 A.
The RPM80 Pro runs with RPM and RGC replaceable evaporators.
The removable cartridge is distinguished by a capacious 5 ml tank, as well as the ability to work with a very wide range of replaceable evaporators, and with two types of serviced single-spiral bases.
The most important feature of this best Juul alternative when using RGC cartridges is the ability to adjust the air supply under the evaporator with the usual ring.
Refueling is done through the silicone plug on the top of the cartridge.
When using Smok RPM80 Pro, it is possible to use an adapter with a 510 format connector for conventional atomizers. The landing margin is very decent, so most devices with a diameter of up to 26 mm will fit absolutely calmly.